Main Power Problems... Circuit Breaker Trips
  Previous Page

Safety Warnings!
Remove Power from the spa/hot tub and circuit breaker panel BEFORE working on electrical equipment!  Failure to comply with this requirement, can lead to electrical shock and/or electrocution!

This is a GENERAL GUIDE ONLY!  USE this information at your OWN RISK!  Consult with or hire a licensed electrician before beginning any work of this type!

Disclaimer
READ FIRST BEFORE YOU CONTINUE
Self Contained, Digital, Standard Circuit Breaker
Breaker Trips: Check these References (Most likely Causes Listed)
Immediately upon application of Power.  (Breaker will not stay on at all)
1.  New Installation or Modified Recently. Go
2.  Existing Installation, was working previously. Go
After a few seconds, up to a few minutes after power application.
1.  Heater Element Go
2.  Pump Motor Go
After an hour or so, or on an unpredictable basis, sometimes hours, sometimes days.
1.  Heater Element Go
2.  Circuit Breaker Wiring / Connections Go

Use this information at your own risk!  Consult or hire an electrician if in doubt as to your particular application.